Posted on

LTA Regulations on Personal Mobility (PMA) in Singapore

Figure 1: LTA Rules on Where You Can Ride Your PMA
(LTA. Active Mobility Act (AMA). Accessed via: https://www.lta.gov.sg/content/ltaweb/en/walk-cycle-ride/rules-and-code-of-conduct.html)

 

For Personal Mobility Aids (PMAs) (Mobility Scooters and Motorised Wheelchairs)

  1. Maximum motorised device speed of 10km/h
  2. A mobility scooter must satisfy the following: 
    (a) Has 3 or more wheels and a footboard;
    (b) Is steered by handlebars or delta tiller;
    (c) Has only one seat (i.e. devices with multiple seats are not considered mobility scooters);
    (d) Is designed to carry only one individual who is unable to walk or has difficulties walking; and
    (e) Is propelled by a motor that forms part of the vehicle.

 

The most IMPORTANT distinction to note is that “mobility scooters” are designed for the elderly and handicapped. However, they are often confused with “electric scooters” or “e-scooters”, which generally refer to fast-moving 2-wheeled scooters which can go as fast as 25 km/h.

Accordingly, some of the regulations applicable to e-scooters DO NOT APPLY to mobility scooters. These include:

  • UL2272 Certification: DOES NOT APPLY
  • Device registration with LTA: DOES NOT APPLY

For further clarifications, please feel free to contact us or the LTA directly.

[2022 Update]: With the rising complaints that PMAs are being abused by individuals without any prior mobility problems, the Government is looking into implementing more restrictive policies. Potential requirements to own a PMA might come in the form of a doctor’s certification and PMA COE. The current maximum speed limit that PMAs can travel on public paths is limited to 10km per hour. This review of PMA law is part of the Government’s effort to ensure safety while staying ahead of rising trends.

Posted on 1 Comment

Types of Leather Finishes

All good quality upholstery, footwear & accessory leathers are cured (tanned) and then dyed right through. It is from this base that tanners then finish leathers in various ways to create different colours, softness and special effects. Some of these special effects are visual and others are to create leathers with different wear characteristics for varying types of use, ie heavily pigmented leathers for heavy soiling and heavy loadings to very soft open leathers for areas of low soiling and lighter wear situations.

Knowing which leather type you have means understanding better how it will wear and what you need to do to keep the appearance of your furniture while enjoying using it. As today’s leathers are more sophisticated so also are the care products needed to maintain them.

Pellé Leather Care Products are one of the world’s very few industry approved care ranges. For protection before release every batch is tested at LASRA, a registered testing authority with the International Council of Tanners.

The Pellé Care Products come highly recommended and are very easy to use. Leather is made to be used and enjoyed. If you have chosen the correct leather for your use, you should enjoy it for many years ~ if you care for it. By cleaning and servicing as required you will extend the life of both the leather and the finish.

PIGMENTED TOP-COATED LEATHERS (includes Antique Finishes)

These leathers have several spray coats of a pigmented (paint like) finish giving a depth to the colour, plus a clear coat for extra protection. Regarded as the most practical of upholstery leathers. Recommended for wear areas of heavy or hard wear i.e. hotels, offices, family rooms, car upholstery, etc. These leathers soften with use and have good resistance to fade or colour loss.

To maintain this type of leather use the Pellé Leather Cleaner and the Pellé Leather Conditioner Protector as directed in the cleaning section of this brochure.

SEMI-ANILINE LEATHERS

These leathers are coloured by dye only. Then a coat of a clear sealer is applied as a protective coating. The prefix semi is used to advise that a protective surface coating has been applied. These leathers are suited to medium to light wear areas. Very soft, they often show the natural markings of the hide, healed scars, growth marks, etc. Do not place in direct sunlight, as resistance to colour loss is medium.

To maintain this type of leather use the Pellé Leather Cleaner and the Pellé Leather Conditioner Protector as directed in the cleaning section of this brochure.

WAXED OR OIL FINISHED LEATHERS

After dyeing these leathers are finished with wax or oil or a combination of both. These special waxes and oils provide a protective coating plus enhance the base dye colour. For areas of heavy to medium wear, ie family rooms, dens, etc. This leather may lighten in colour over time requiring replenishment of the waxes and oils (refer section Waxed Oiled Leather back page). Do not place in direct sunlight, as resistance to colour loss is medium.

To maintain this type of leather use the Pellé Leather Cleaner and the Pellè Revitaliser and occasionally Pellé Leather Conditioner Protector and as directed in the cleaning section of this brochure.

NUBUCK LEATHERS

A nubuck is an aniline (dyed only) leather, lightly snuffed or sanded leaving a nap or velour type finish. These leathers are coloured by dye, however, they can be airbrushed very lightly with pigment to give added colour. They do not have any protective surface coating. However, they have some protection through the addition of special treatments during the processing. This will give some resistance to soiling or spillages. Do not place in direct sunlight, as resistance to colour loss is medium to light. Recommended for wear areas of light soiling.

delete it, then start writing!